Filter
Top Products
Configuring Switching
26
SonicOS 5.7: Advanced Switching Feature Guide and Screencast Tutorial
Step 2 In the Edit Mirror Group window, type a descriptive name for the group into the Interface Group Name
field.
Step 3 For the Direction, select one of the following:
• ingress – Select ingress to monitor traffic arriving on the mirrored port(s).
• egress – Select egress to monitor traffic being sent out on the mirrored port(s).
• both – Select both to monitor traffic in both directions on the mirrored port(s).
Step 4 In the All Interfaces list, select the port to mirror the traffic to and click the top right-arrow button to move
it to the Mirror Port field. You must use an unassigned port as the mirror port.
Step 5 In the All Interfaces list, select one or more ports to be monitored, and click the lower right-arrow button
to move it/them to the Mirrored Ports field. You will be able to monitor traffic on the mirrored port(s) by
connecting to the mirror port.
Step 6 Click OK.
Step 7 To begin copying network packets from the Mirrored Ports to the Mirror Port, select the Enable checkbox
in the Switching > Port Mirroring page.
Step 8 Click OK.
Deleting a Port Mirroring Group
To remove a port mirroring group, perform the following steps:
Step 1 On the Switching > Port Mirroring page, select the checkbox next to the port mirroring group that you want
to delete.
Step 2 Click the Ungroup button.
Step 3 Click OK in the confirmation dialog box.