Filter
Top Products
Configuring Switching
24
SonicOS 5.7: Advanced Switching Feature Guide and Screencast Tutorial
Step 8 In the Add LAG Port window, select the interface for the link partner from the Port drop-down list.
Step 9 If you specified a key for the first interface (the aggregator), clear the Auto-Detect checkbox and type the
same key into the Key field. If Auto-Detect was left enabled for the first interface, leave it enabled for this
one as well.
Step 10 Clear the Aggregator checkbox. Only one interface can be an aggregator for a Logical Link.
Step 11 Select the LACP Enable checkbox. This is necessary to create the Logical Link.
Step 12 Click OK.
The Switching > Link Aggregation page displays the Logical Link. The Partner column will display the
MAC addresses of the link partners after they are physically connected.