Filter
Top Products
SFG10E ELECTRIC SURFACE GRINDER — OPERATION AND PARTS MANUAL — REV. #1 (07/16/07) — PAGE 11
MAINTENANCE, REPAIR AND STORAGE
1) Use only genuine, approved replacement parts and
accessories for maintenance and repair. Use of parts
and accessories manufactured by others can result
in property damage and/or personal injury.
2) Follow the
Service
instructions as outlined in the
appropriate section of this manual.
3) Always stop the electric motor and disconnect the
power source cable BEFORE checking or working on
the SURFACE GRINDER.
4) Always properly maintain the SURFACE GRINDER.
Frequently check all fasteners and individual parts.
Built in safety features are effective only if they are
maintained in good working condition. Replace any
questionable part or assembly with a genuine, factory
approved, replacement part. Do not forsake proper
maintenance for the price of a few replacement parts.
Proper maintenance does not cost...it actually pays
dividends. Do not attempt any maintenance repair work
not described in this manual. Have such work
performed at your dealer’s service facility.
5) Do not operate the SURFACE GRINDER without the
use of factory approved V-belt and diamond blade
guards that are maintained in proper structural
condition. Frequently inspect the guards for signs of
wear, cracks and other signs of fatigue. If there is
any question regarding the structural integrity and/or
condition of the belt guard, properly dispose and
replace with a genuine, factory approved, replacement
part only.
6) Maintain all safety and operation decals in proper
condition. If any decal becomes damaged and/or
unreadable, replace with a genuine, factory approved,
replacement part only.
7) The SURFACE GRINDER utilizes many self-locking
type hexagon head nuts to minimize the effects of
vibration. Replace all self-locking hardware with
genuine, factory approved, replacement parts only.
8) Consult the material supplied by the electric motor
manufacturer for specific information relative to proper
operational, lubrication and storage requirements.
SAFETY PRECAUTIONS