Filter
Top Products
SFG10E ELECTRIC SURFACE GRINDER — OPERATION AND PARTS MANUAL — REV. #1 (07/16/07) — PAGE 5
NOTICE TO OPERATORS
IF YOU CAN NOT READ OR DO NOT FULLY UN-
DERSTAND THE CONTENTS OF THIS MANUAL,
PLEASE CONTACT THE FACTORY FOR PROPER
ASSISTANCE BEFORE ATTEMPTING TO OPER-
ATE THIS PRODUCT.
SI TU NO PUEDES LE’ER O NO COMPRENDES
EL CONTENIDO DE ESTE MANUAL FAVOR DE
PONERSE EN CONTACTO CON LA. FABRICA
PARA ASSISTENCIA- A PROPIA ANTES DE
INTENTAR PARA OPERAR ESTE PRODUCTO.
SOLLTEN SIE DIESE GEBRAUCHSANWEISUNG
NICHT LESEN KOENNEN ODER ES NICHT
VOLLKOMMEN VERSTEHEN, WENDEN SIE SICH
BITTE AN DEN HERSTELLER FUER RICHTIGE
HILFE EHE SIE VERSUCHEN DIESES PRODUKT
ZU OPERIEREN.
SI VOUS NE LISEZ OU NE COMPRENDRE
ENTIEREMENT LES MATIERES DE CE MANUEL,
S’IL VOUS PLAIT, CONTACTEZ L’USINE POUR
L’ASSISTANCE APPROPRIEE AVANT
D’UTILISER LE PRODUIT.
You CAN be
INJURED
if you DO NOT follow directions.
CAUTION
CAUTIONCAUTION
CAUTIONCAUTION
CAUTION
You WILL be
KILLED
or
SERIOUSLY
injured if you DO
NOT follow directions.
DANGERDANGER
DANGERDANGER
DANGER
These safety alert symbols identify important safety
messages in this manual. When you see these
symbols, be alert to the possibility of personal injury
and carefully read the message that follows.
Do not allow anyone to operate the SURFACE
GRINDER without first reading this Operator Manual
and becoming familiar with its operation. The manu-
facturer of the SURFACE GRINDER has gone to great
extremes to provide the owner(s) and/or operator(s)
with the finest equipment available for its intended job
function of removing covering materials from concrete
and wood floor surfaces. Yet, the possibility exists that
the SURFACE GRINDER can be utilized in and/or
subjected to job applications not perceived and/or
anticipated by the manufacturer. Such misuse and/or
misapplication of the SURFACE GRINDER can lead
to the possibility of serious damage, injury or even
death. It is the responsibility of the owner(s) and/or
operator(s) to determine that the SURFACE
GRINDER is being utilized and/or operated within the
scope of its intended job function. It is the responsibil-
ity of the owner(s) and/or operator(s) to establish,
monitor and constantly upgrade all safety programs
and/or practices utilized in and for the operation of
the SURFACE GRINDER. The purpose of such pro-
grams is to provide for owner(s’) and/or operator(s’)
safety. Operators must be instructed to recognize and
avoid unsafe conditions associated with their work
(29 CFR 1926.21 (b)(2)) and/or applicable updated
revisions. It is the responsibility of the owner(s) and/
or operator(s) to determine that no modifications and/
or alterations have been made to the SURFACE
GRINDER. Modifications and/or alterations can lead
to the possibility of serious damage, injury or even
death. It is the responsibility of the owner(s) and/or
operator(s) to make this Operator Manual available
for consultation during all phases of operation. Refer
to OSHA 2207 and/or applicable updated revisions
which contains all OSHA job safety and health rules and
regulations (1926 and 1910) covering construction.