Filter
Top Products
SFG10E ELECTRIC SURFACE GRINDER — OPERATION AND PARTS MANUAL — REV. #1 (07/16/07) — PAGE 38
Specifications
STRUCTURE ................................................................... Unitized, Welded Steel Plate
DRIVE REDUCTION SYSTEM ........................................ B45 Series Belt/Pulley/Spur Gear transmission.
MAXIMUM GRINDING WIDTH ........................................ 10 inches (254 mm)
OVERALL MACHINE WIDTH ........................................... 27-1/2 inches (699 mm)
OVERALL MACHINE LENGTH ........................................ 55.25 inches (1,403 mm)
TYPICAL OPERATOR HANDLE HEIGHT ........................ 38 inches (965 mm)
VACUUM CLEANER CONNECTION DIAMETER ............. 3 inches (76 mm)
BASIC WEIGHT .............................................................. 235 lbs (107 kg)
SFG10E ELECTRIC MOTOR, 1.5 hp, 1725 RPM, 13.7 amperes @ 115 VAC, 60 Hz. The electric motor requires a clean
(no other electric products on the same circuit) 20 ampere capacity circuit to properly function on 115 VAC, 60 Hz.
SPECIFICATIONS