Filter
Top Products
SFG10E ELECTRIC SURFACE GRINDER — OPERATION AND PARTS MANUAL — REV. #1 (07/16/07) — PAGE 37
STORAGE
Storage
Proper procedure for long term storage of the SURFACE
GRINDER will protect it against the effects of corrosion
and damage. If the SURFACE GRINDER is not to be
operated for a period of 30 days or more, proceed to store
as follows:
1) Clean all accumulated foreign material from the
SURFACE GRINDER utilizing an appropriate
safety solvent.
Observe all applicable safety precautions for the
solvent.
CAUTION
CAUTIONCAUTION
CAUTIONCAUTION
CAUTION
2) Check all visible parts for wear, breakage or damage.
Order any part not required to make the necessary
repair. This will avoid a needless delay when operating
the SURFACE GRINDER at next use.
3) Apply a dry film lubricant to all exposed metal
components to prevent the formation of rust.
4) Store the SURFACE GRINDER inside. If the SURFACE
GRINDER must be stored outside, protect it with a
suitable covering.