Filter
Top Products
10. Leave the machine off for 10-15 minutes
to allow the descaling solution to take
affect.
11. Press the ‘POWER’ button once to turn
the espresso machine on.
12. Press the 'COFFEE' button and allow the
remaining solution to cycle through the
group head. Press button again to stop.
13. Remove the water reservoir from the
machine and rinse thoroughly under
running water, ensuring that all traces
of the descaling solution are removed.
Fill with clean water and replace the
reservoir.
14. Press the 'COFFEE' button and allow the
entire water reservoir to cycle through the
group head. Press button again to stop.
Note: Depending on the size of the container
under the group head on occasion this may
need to be emptied throughout this process.
15. When this is finished remove the
container under the group head and give
the machine a good wipe over.
16. Carefully replace the rubber seal, brewing
filter/shower screen and washer to the
group head.
Important: Ensure the screw is tightened well.
17. Fill the water reservoir with fresh water
and position it in to the machine.
Descaling (continued)
25