Filter
Top Products
Factory Reset
To undo any changes made to the program
you can revert back to the original factory
settings.
To do this you need to follow the instructions
below:
1. Insert the power cord into a 230-240V
AC power outlet and switch the power
‘ON’ at the mains only, so that no lights
are illuminated on the espresso machine
control panel (ie. the power outlet should
be 'ON' but the espresso machine will be
'OFF').
2. Press and hold down the ‘POWER’ button
for 3 seconds.
3. Release the ‘POWER’ button.
Note: This resets ALL the program settings
back to factory settings, including
the espresso and steam thermoblock
temperatures and the steam pump rate.
4. A single long beep will sound to indicate
the factory reset has been completed.
Note: The espresso machine will then
automatically power on and begin heating up.
Advanced Programming Options (continued)
29