Filter
Top Products
9
Using your StickMaster stick blender continued
Using the whisk attachment
1. Insert the whisk attachment onto the base
of the motor housing until you hear a click.
See Figure 7
2. Plug the power cord into a 230-240 volt
power outlet and turn the power on.
Holding the stick blender, lower the whisk
into food.
3. Select the optimal speed for whisking by
gradually increasing the speed control
dial from 1 to 5, or as desired, and then
depressing the power button (I). Speed one
on the speed control dial is the slowest and
speed five is the fastest.
Note: All stick blenders are designed to
operate only whilst the power buttons remain
depressed.
4. For an extra boost of power during
operation, the turbo speed button (II) may
be depressed.
Note: The power button (I) should be released
when selecting the turbo speed button (II).
5. To stop the stick blender, take your finger
off the power button or the turbo speed
button.
6. To detach the whisk attachment, push
the buttons at either side of the base of
the motor housing until the two pieces
separate. See Figure 8.
Figure 7
Figure 8