Filter
Top Products
Using your StickMaster stick blender
Important: Ensure that the stick blender is
unplugged from the power outlet before
assembling or removing attachments.
1. Insert the motor housing into the hole on
the top of the shaft until you hear a click.
See figure 1.
2. Plug the power cord into a 230-240 volt
power outlet and turn the power on.
3. Select the optimal speed for the processing
task, by turning the speed control dial from
1 to 5. Speed one on the speed control
dial is the slowest and speed five is the
fastest. Then lower the stick blender into
food and depress the power button (I).
Note: All stick mixers are designed to
operate only when the power buttons remain
depressed.
4. For an extra boost of power during
operation, the turbo speed button (II) may
be depressed.
Note: The power button (I) should be released
when selecting turbo speed.
5. To stop the stick blender, take your finger
off the power button or the turbo speed
button.
6. To detach the shaft, push the buttons
at either side of the base of the motor
housing until the two pieces separate.
See Figure 2.
Figure 1
Figure 2
6