Filter
Top Products
12
Model 490Operating Procedures
090807
Step 4
Install the freezer door. Place the freezer door
gasket into the gr oove on the bac k of the freezer
door. Slide the front bearing ov er the baffle rod so
the flanged edge is against t he door. DO NOT
LUBRICATE THE GASKET OR BEARING.
Figure 10
Insert the baffle r od through the beater in the
freezing cylinder. With the door seated on the
freezer studs, install the hands crews. Tighten
equally in a criss-cross pattern to ins ure the door is
snug.
Figure 11
Rotate the draw v alve bracket to the left and center
it into pos ition by raising the dr aw arm and placing it
into the s lotted groove of the draw valve bracket.
Note: The draw valve bracket must be positioned
with the notch to the left.
Figure 12
Step 5
Lay the air tube and hopper gasket in the bottom of
the mix hopper .
Figure 13