Filter
Top Products
22
Model C302Operating Procedures
Step 9
Snap the draw valve handle onto the door spout.
Align the hole in the draw valve with the slot in the
draw handle.
Figure 15
Step 10
Slide the pivot pin through the draw handle and into
the draw valve.
Figure 16
Step 11
Place the draw handle slide over the opening in the
draw handle and the pivot pin. Secure the assembly
with screws.
Figure 17
Step 12
Insert the spring into the front of the door spout.
Figure 18
Step 13
Place the threaded cap on the end of the draw valve
cavity. Turn the cap clockwise until it is secure.
Figure 19