Filter
Top Products
19
Model C713 Important: To the Operator
Change the time by touching the UP arrow with the
cursor under the hour position. Move the cursor to
the minutes by touching the SEL symbol. Once the
correct minutes are entered, touch the SEL symbol
to advance the cursor to the month. (See Figure 19.)
SET CLOCK
12
:01 7/15/2004
>Exit
Figure 19
Enter the correct month, day, and year. Then touch
the SEL symbol to advance to the DAYLIGHT
SAVING TIME screen. (See Figure 20.)
DAYLIGHT SAVING TIME
ENABLED
> Enable
Disable
Figure 20
The Daylight Saving feature when enabled, will
automatically adjust the control clock for daylight
saving time. To Disable the Daylight Saving Time
feature, select the UP arrow to move the arrow to
Disable. Then touch the SEL symbol to save the
new setting.
The AUTO START TIME option allows the Manager
to set the time of day at which the machine
automatically enters the AUTO mode from the
STANDBY mode. The machine must be in the
STANDBY mode in order to AUTO start at the
programmable time. The AUTO START TIME can
also be disabled and require starting the AUTO
mode manually. (See Figure 21.)
AUTO START TIME
DISABLED
Enable
> Disable
Figure 21
Enable the AUTO START TIME by selecting the UP
arrow symbol to move the arrow u p to Enable.
Touch the SEL symbol to advance to the next
screen. (See Figure 22.)
AUTO START TIME
00:00
Change
>Exit
Figure 22
Program the AUTO START TIME by selecting the
UP arrow symbol to move the arrow to Change.
Touch the SEL symbol to advance to the next
screen. (See Figure 23.)
AUTO START TIME
00
:00
Figure 23
Use the arrow symbols to program the AUTO
START TIME b y increasing or decreasing the hour
setting above the cursor. Touch the SEL symbol to
advance the cursor and program the minutes
setting. Select the SEL symbol to return to the
previous screen with the new time setting displayed.
Select the SEL symbol to exit the screen and return
to the Menu.
The STANDBY option is used to manually place
either side of the machine in the Standby mode
during long, no draw periods. Select the STANDBY
screen from the Menu. Touch the SEL symbol to
activate Standby.
Discontinue Standby operation by exiting the
Manager's Menu and select the AUTO mode.
(See Figure 24.)
STANDBY MODE
> EXIT
Figure 24