Filter
Top Products
31
Model C713 Operating Procedures
Brush Cleaning
Step 1
Prepare an approved 100 PPM cleaning solution
(examples: 2-1/2 gal. [9.5 liters] of Kay-5R or 2
gal. [7.6 liters] of Stera-SheenR). USE WARM
WATER AND FOLLOW THE MANUFACTURER'S
SPECIFICATIONS. Make sure all brushes provided
with the freezer are available for brush cleaning.
Step 2
Thoroughly brush clean all disassembled parts in the
cleaning solution, making sure all lubricant and mix
film is removed. Be sure to brush all surfaces and
holes, especially the holes in the freezer door.
Step 3
Rinse all parts with clean, warm water. Place the
parts on a clean, dry surface to air dry overnight.
Step 4
Return to the freezer with a small amount of
cleaning solution. Using the black b rush, clean the
rear shell bearing at the back of the freezing
cylinder.
Figure 54
Repeat these steps on the other side of the
machine.
Step 5
Wipe all exterior surfaces of the freezer with a clean,
sanitized towel.