Filter
Top Products
26
Model C713Operating Procedures
Note: This freezer features three adjustable draw
handles to provide portion control, giving a better
consistent quality to your product and controlling
costs. The draw handle should be adjusted to
provide a flow rate of 5 to 7-1/2 oz. (142 g. to
213 g.) of product by weight per 10 seconds.
To I NCREASE the flow rate, turn the adjustment
screw CLOCKWISE. Turn the adjustment screw
COUNTER-CLOCKWI SE to DECREASE the flow
rate.
Step 19
Snap the design caps over the bottom of the door
spouts.
Figure 44
Step 20
Slide the two drip pans into the holes in the side
panels.
Figure 45
Step 21
Install the front drip tray and splash shield under the
door spouts.
Figure 46
Step 22
Slide two o-rings on one end of the feed tube. Slide
two o-rings on the other end of the feed tube.
Figure 47
Step 23
Slide the small o-ring into the groove of the air
orifice. Do not lubricate the o-ring.
Figure 48