Filter
Top Products
20
Models C708 & C716Important: To the Operator
050628
AUTO START TIME
STANDBY MODE
BRUSH CLEAN CYCLE
MIX LEVEL AUDIBLE
FAULT DESCRIPTION
LOCKOUT HISTORY
HEAT CYCLE SUMMARY
HEAT CYCLE DATA
SYSTEM INFORMATION
CURRENT CONDITIONS
Selecting “EXIT FROM MENU” will exit the
Manager’s Menu and the return the control panel
symbols to normal operation.
The SERVING COUNTER screen is used to check
or reset the number of servings dispensed from the
machine. The SERVING COUNTER will
automatically reset to zero w hen the machine is
brush cleaned.
SERVINGS COUNTER
0
> Next
Reset the SERVING COUNTER by touching the
SEL symbol to advance to the next screen. Touch
the UP arrow symbol to move the arrow (>) to YES
and touch the SEL s ymbol. The servings counter will
reset to zero and exit back to the Manager’s Menu.
RESET DRAW COUNTER
Yes
>No
The SET CLOCK option allows the Manager to
adjust the control clock date and time. The date and
time may only be changed after the freezer has
been manually cleaned but before it has been
placed in the AUTO or STANDBY mode. The
following message will be displayed i f the S ET
CLOCK option is selected when the machine is not
in a brush clean state.
SET CLOCK
12:01 2/21/2004
NO CHANGES ALLOWED
Press Any Key
To change the date or time, select the SET CLOCK
option in the m enu. Touch the UP arrow symbol to
advance the arrow from Exit to Change, then touch
the SEL symbol to select the Change option.
SET CLOCK
12:01 2/21/2004
Change
>Exit
Change the time b y touching the UP arrow with the
cursor under the hour position. Move the cursor to
the minutes position b y touching the SEL symbol.
Once the c orrect minutes are entered, touch the
SEL symbol to advance the cursor to the month.
SET CLOCK
12
:01 2/21/2004
>Exit
Enter the correct month, day, and year. Then touch
the SEL symbol to advance to the DA YLIGHT
SAVING TIME screen.
DAYLIGHT SAVING TIME
ENABLED
> Enable
Disable
The Daylight Saving feature, when enabled, will
automatically adjust the control clock for daylight
saving time. To d isable the Daylight Saving Time
feature, touch the DOWN arrow to move the arrow
to “Disable”. Then touch the SEL s ymbol to s ave the
new setting.