Filter
Top Products
33
Models C708 & C716 Operating Procedures
Step 9
Secure the pump parts in pos ition b y s liding the
retaining pin through the cross holes loc ated a t one
end of the pum p cylinder. (See Figure 38.)
15113
Figure 3 8
Note: The head of the retaining pin should located
at the top of the pum p when installed.
Step 10
Assemble the feed tube assembly. Slide the c heck
ring into the g roove o f the feed tube.
(See Figure 39.)
15133
Figure 3 9
Step 11
Install one r ed o-ring on eac h end of the mix feed
tube, and thoroughly lubricate. (See Figure 40.)
15132
Figure 4 0
Step 12
Lay the pump assembly, pump clip, cotter pin and
agitator in the bottom of the mix hopper for
sanitizing. (See Figure 41.)
12166
Figure 4 1