Filter
Top Products
SMW Oven Care and Use Manual
WARMING DRAWER • PARTS AND REMOVAL
To remove the drawer:
WARNING: Do not remove drawer
while hot.
• Pull drawer to fully open position.
Be sure drawer is empty before removing.
• Lift up on left side Release Lever and press down on
the right side Release Lever.
• Firmly pull the drawer outward until each Drawer
Rail pulls free from each Inner Cabinet Slide. Retract
Cabinet Rails while drawer is being cleaned.
To replace the drawer:
• Be sure Cabinet Rails are pushed inside cabinet.
• Align each Drawer Rail to each Inner Cabinet Slide.
Use the Slide Lock to guide placement.
• Close the drawer completely; the Slide Lock will se-
cure the drawer.
• Pull out drawer fully to check that both locks are
engaged.
!
!
REMOVING THE DRAWER
Parts
1. Moist • Dry Selector
2. Stainless Steel Drawer Interior
3. Gasket
4. Rail Lock
5. Thermostat Dial
6. ON Light Lens
7. ON Light Viewer
1
2
3
4
5
6
7
Page 24
Warming Drawer Parts / Removal