Filter
Top Products
............ www.truemfg.com ............
True Food Service Equipment, Inc.
12
12
SHELVING INSTALLATION / OPERATION &
LIGHT SWITCH LOCATION
INSTALLATION / OPERATION INSTRUCTIONS
SHELF & ORGANIZER INSTALLATION:
Step 1
A. Hook shelf clips onto shelf standards.
(see illustration).
B. Position all four shelf clips equal in distance
from the floor for flat shelves.
WIRE SHELVES:
Wire shelves are oriented so that cross support bars
are facing down.
NOTE:
T-Series models include an airflow guard on the rear
of shelves to maintain an air space at the rear of the
cabinet. (see illustration).
Step 2
Place shelves on shelf clips making sure all corners
are seated properly.
LIGHT SWITCH LOCATION:
Light switch location depends upon the T-Series model.
Most T-Series models will have the light switch located
inside the unit on the right side of the ceiling. Most
instances the switch is located next to the temperature
control. Some models have the switch located on the
right side of the evaporator housing along the interior
ceiling.
Shelf
Clip
Shelf
Shelf
T-Series
& GDM-5
Airflow
Guard
Pillaster