Filter
Top Products
............ www.truemfg.com ............
True Food Service Equipment, Inc.
5 5
INSTALLATION / OPERATION INSTRUCTIONS
To insure that your unit works properly from the
first day, it must be installed properly. We highly
recommend a trained refrigeration mechanic and
electrician install your True equipment. The cost
of a professional installation is money well spent.
Before you start to install your True unit,
carefully inspect it for freight damage. If damage
is discovered, immediately file a claim with the
delivery freight carrier.
True is not responsible for damage incurred
during shipment.
OWNERSHIP
Adjustable Wrench
Phillips Head Screwdriver
Level
REQUIRED TOOLS
NOTE:
Units with a solar thermometer will experience a 15
second delay after exposed to light before it reads the
proper temperature.
The following procedure is recommended for uncrating
the unit:
A. Remove the outer packaging, (cardboard and
bubbles or styrofoam corners and clear plastic).
Inspect for concealed damage. Again, immediately
file a claim with the freight carrier if there is
damage.
B. Move your unit as close to the final location as
possible before removing the wooden skid.
C. Remove door bracket on swinging glass door models
(see image 1-2). Sliding glass door models contain
shipping blocks (three for each door). Remove
the two styrofoam blocks taped to the top of the
door tracks (see image 3). The shipping blocks
are orange in color and by opening the door a little
the blocks can be removed (see images 4-6). Do
not throw the bracket or blocks away. For future
cabinet movement the bracket and blocks will need
to be installed so the glass door does not receive any
damage. (See image for bracket and shipping block
removal)
Note: Keys for coolers with door locks are located in
warranty packets
.
UNCRATING
INSTALLATION / OPERATION INSTRUCTIONS
1 2 3
4
5
6