Filter
Top Products
............ www.truemfg.com ............
True Food Service Equipment, Inc.
7
7
OPTIONAL DIPWELL FOR TDC MODELS
(Installing Dipwell):
True Dipping Cabinets come standard with pre-installed riv-nut
holes to attach an optional dipwell. There are multiple riv-nut
holes for dipwell locations on the cabinet. Locate which area
you want the dipwell installed then proceed with the directions
below. (See image 1).
A. Remove the dipwell backplate from one of two boxes that
contain the dipper well assembly.
B. Two Phillips pan head machine screws are provided in the kit
to mount the backplate to the cabinet with the Inlet Tube Clip
and Inlet Tube. (See image 2 and illustration 1).
C. After attaching the dipwell bowl to the backplate connect the
drain tube to the bowl and run it to a floor drain.
D. Assemble the Plastic Tube to the Barrel Valve and then onto
the Inlet Tube. (See illustration 1).
E. Have a plumber tap the Saddle Valve Assembly into the copper
water line.
INSTALLATION / OPERATION INSTRUCTIONS
Image 1 (Riv-nut locations).
Image 2 (Dipwell Backplate installation).
Image 3 (Dipwell bowl installation).
10" Deep Drawn
"Dipwell"
Backplate
1/4"-20nc x 5/8"
S.S.T. Pan Head
Machine Screw
Inlet
Tube
Inlet
Tube
Clip
Leather Gasket
Overfl ow
Tube
Barrel Valve
Male Connector
Assembly
Ferrule
Saddle Valve Assembly
Riv-Nut
Locations
Riv-Nut
Locations
Illustration 1
Leather Gasket
Coupling Nut
Tail
Piece
Barrel
Valve
Ferrule
10" Deep Drawn
"Dipwell"
Overfl ow Tube
Inlet Tube
Inlet Tube Clip
S.S.T. Pan Head
Machine Screws
Backplate
Male Connector
Assembly
Male
Connector
Assemblies
1/4” Plastic Tubing
(leading toward water source
[saddle valve assembly])
Coupling Nut
Tail Piece
( 1” Connection
will be needed for
the drain).