Filter
Top Products
41
48-7/8˝ (1241 mm)
(min/max
)
11˝ (279 mm)
(minimum)
30˝ (762 mm) (minimum)
28-1/2˝ (724 mm)
(minimum/maximum)
Recommended drill
hole location if conduit
box (electrical outlet)
is high.
Recommended drill
hole location if conduit
box (electrical outlet)
is low.
To obtain proper
fit of the oven into
the cabinets, junction
box must be located
above or below the
oven opening.
To obtain proper
fit of the oven into
the cabinets, junction
box must be located
above or below the
oven opening.
1˝ (25 mm) (minimum)
24˝ (610 mm)
(minimum)
Base cabinet
support must be
able to support
the oven’s weight -
approximately
410 lb. (186 kg)
TurboChef
recommends a
solid base.
25-1/8˝ (638 mm)
(min/max
)
34-3/4˝ (883 mm)
(minimum)
30˝ (762 mm) (minimum)
28-1/2˝ (724 mm)
(minimum/maximum)
Recommended drill
hole location if conduit
box (electrical outlet)
is high.
Recommended drill
hole location if conduit
box (electrical outlet)
is low.
To obtain proper
fit of the oven into
the cabinets, junction
box must be located
above or below the
oven opening.
To obtain proper
fit of the oven into
the cabinets, junction
box must be located
above or below the
oven opening.
1˝ (25 mm) (minimum)
24˝ (610 mm)
(minimum)
PLEASE NOTE:
Single wall ovens
installed under a
counter require a
low conduit box
(electrical outlet).
A 1/2˝ (13 mm)
corner radius is
suggested for the
2 upper corners.
A 1/2˝ (13 mm)
corner radius is
suggested for the
2 upper corners.
5-1/2˝ (140 mm) (minimum)
1˝ (25 mm) (minimum)
It is recommended
that your base cabinet
support be installed
flush with the top of your
cabinet face.
Base cabinet
support must be
able to support
the oven’s weight -
approximately
230 lb. (104 kg)
TurboChef
recommends a
solid base.
Reference