Filter
Top Products
32
Design
■
Features
■
Performance
3. Locate the ice cube thickness adjustment dial on the control board. Turn the dial clockwise (+ number)
to thicken or counterclockwise (- number) to thin the ice bridge.
Ice Cube Mold
4. Reinstall front access cover.
5. Reconnect power to ice maker.
6. Empty ice bucket.
SAMPLE AREA
SERVICING
Ice thickness adjustment dial should be turned only one increment (number on dial) at a
time. Allow the ice maker to stabilize for 24 hours before making further adjustments. Since
ice cubes in any given batch will vary, choose cubes from the sample area for comparison
when making adjustments. The factory setting is “0”.
IMPORTANT