Viking RDMOR206 Microwave Oven User Manual


 
40
E
FAN
The fan will automatically start when heat rises
from the cooking surface and when convection,
high mix, low mix or the broil settings are used.
This protects the microwave oven from exces-
sive temperature rise. The fan will stay on until
the temperature decreases. It cannot be turned
off manually during this time.
For other uses, select either high or low
speed.
PRECAUTIONS FOR PROPER USE:
1. DO NOT leave cooking surface unattended while using high temperatures.
Automatic fan may start and provide excessive air to the surface units. This
may cause spattering or boilover.
2. Avoid burning food.
3. Keep grease filters clean.
LIGHT
1. To replace light bulbs, first disconnect
power to the microwave oven at
the circuit breaker panel or by
unplugging.
2. To release cover remove the screw on
the light cover. (See illustration.)
3. Replace bulbs with only 20 watt and
40 watt bulbs. These are available at
most hardware stores or lighting
centers. The unit will be shipped with
one 20 watt bulb and one 40 watt
bulb. DO NOT USE A BULB LARGER
THAN 40 WATTS.
4. Close light cover and secure with screw removed in step 2.
Cautions: Light cover may become very hot. Do not touch glass when light is
on. Do not use light for long time use such as a night light.
Light cover
Screw
Light
bulbs
Ring
Filter