Filter
Top Products
1514
PPrroobbee ffuunnccttiioonn
The meat probe takes the guesswork our of roasting by cooking foods to
the ideal internal temperature. The “probe temp.” setting is used to
automatically turn the oven off when the internal temperature of the meat
being roasted is reached.
TToo sseett tthhee aauuttoommaattiicc pprroobbee ffuunnccttiioonn
1. Insert the probe into the meat and slide into oven.
2. Plug the probe into the outlet located on left interior wall of the oven
and close the oven door.
3. Press and release the “probe temp.” button.
4. Turn the “Set” knob to the desired internal temperature. “Probe” and
the desired internal temperature will be displayed to the lower right of
the analog clock. NOTE: It is recommended to set the internal
temperature about 10 degrees lower than actual desired internal
temperature. The meat will continue to cook when removed from the
oven and will reache desired internal temperature while “standing”.
“Probe” flashes, tone sounds three times, and oven shuts off when desired
temperature is reached. The tone will sound twice every ten seconds after
completion until probe function is closed.
SSeettttiinngg tthhee AAuuttoommaattiicc SSttaarrtt TTiimmee BBaakkee PPrrooggrraamm
The “bake hours” and “start time” modes of the Timer can be used to
automatically turn the oven on and off at a preselected time. The
Automatic Time Bake Program is ideal for foods with no danger of spoilage
during the time the oven is left off.
TToo sseett tthhee AAuuttoommaattiicc TTiimmee BBaakkee pprrooggrraamm
1. Turn the MANUAL/TIMED knob to TIMED, UPPER TIMED OR LOWER
TIMED position, depending upon the oven mode and oven being used.
2. Set the Oven Function Selector to the BAKE, CONVECTION BAKE, or
TruConvec
TM
position, depending upon the type of baking being used.
3. Press and release “start time”. Turn the “Set” knob to desires start time.
4. Press and release “bake hours” button. Turn the “Set” knob until
desired duration of cooking time is reached. “Delay” will be displayed
in the upper left corner of the digital display during the delay cycle.
Once the bake cycle begins, the cook time/remaining time and “Cook”
will be displayed.
When the specified start time is reached, the oven will automatically turn
on. The oven then bakes for the length of time programmed into the Bake
Hours mode, turn the oven off, and sounds the alarm. “Cook” will flash
and the tone will sound three times when the time is completed; oven will
turn off. The tone will sound twice every ten seconds after completion until
timer function is cleared.
NOTE: If the “bake hours” button is not pressed within ten seconds of
setting the “start time”, the user will automatically be prompted to enter
the “bake hours”. A tone will sound twice every five seconds until the
“bake hours” is entered.