Filter
Top Products
26
11. With a
1
⁄4" socket, remove (2) holding screws securing the limit body to the mounting bracket. (Fig. 34)
Fig. 34
12. Install new limit by reversing steps 1-9. When installing new limit do not kink the limit wire or bend the limit
probe. Make sure that the probe is mounted intimately against the burner tube. Wrap limit holding nuts with
new teflon tape.
REMOVAL OF COOKER BURNERS
1. Follow steps 1-5 under Removal of Control Panel.
2. Follow steps 1-4 under Removal of Control Panel Housing.
3. With a
1
⁄2" socket, loosen (2) bolts holding the burner to the burner mounting frame. (See Fig. 29)
4. With (2) hands grasp the burner body and push it upward over the bullet head burner pilot. Tilt the burner
head back and lift it from the cooker. (See Fig 30)
5. Reinstall burner by reversing steps 1-4.