Filter
Top Products
39
FRONT
CHANNEL
BEHIND FRONT
CHANNEL
10. Reinstall faucet by reversing steps 1-10 as needed.
REMOVAL OF SCRAP BOX HOUSING
Note that the scrap box has formed flanges on all 4 corners. These flanges are used to attach the box to the
appliance base frame. There are (3) screws in each flange. Removal of these screws in the front and back
sections of the cooker will allow the scrap box housing to be removed.
1. Open cabinet door, empty and remove scrap box drawer. (See Fig. 48)
2. From the front of unit with your hand reach around the front frame channel and feel for the (3)
screws and scrap box mounting bracket. (Fig 57)
Fig. 57
3. With a
5
⁄16" socket remove (3) holding screws from each flange on either side of the front frame channels.
(Refer to Fig. 57)
4. From the front of the appliance with a
5
⁄16" socket and a long socket extension, remove (3) holding screws
located in the back section of the cabinet on the body frame rear left and right channels. (Fig. 58)
Fig. 58
REAR CHANNELS