Filter
Top Products
56
9. Carefully fold the thermostat wiring and body so that it will set between the burners. Wedge it securely
so that it will not fall out when the tank assembly is lifted from the appliance.
10. Follow steps 1-5 under Removal of Cooker Power Supply Housing.
11. Remove the ignitor boot. (Fig. 90)
Fig. 90
12. With a
7
⁄16" socket, remove (2) 1/4-20 nuts (from under the front of the base frame) that secure the tank
support bracket to the frame assembly.
13. From rear of appliance disconnect the inlet gas tube union. (See Fig. 76)
14. Disconnect drain hose and water fill hoses.
15. With the assistance of another person, stand in front of the cooker, grasp the back and the front of tank then
carefully tilt the tank back forward and lift tank out of the cooker body. (Fig. 91)
Fig. 91
TANK BACK