Vulcan-Hart 52424 Pasta Maker User Manual


 
9
SECTION II
PASTA COOKER SERVICE ADJUSTMENTS
ADJUSTMENT OF GAS REGULATOR
1. Follow steps 1-6 under Combination Gas Valve Regulator Check in Section I of this manual.
2. Remove the regulator adjustment cap from the combination valve. (Fig. 1)
Fig. 1
3. Turn the gas adjustment screw clockwise to increase pressure and counterclockwise to decrease pressure.
4. Adjust pressure so that manometer reading agrees with the rating plate.
THERMOSTAT CALIBRATION
1. Follow steps 1-4 under Thermostat Calibration Check in Section I of this manual.
2. Turn temperature dial to boil setting.
3. Allow cooker to boil and temperature to stabilize for several minutes.