Filter
Top Products
47
REMOVAL OF PASTA COOKER POWER SUPPLY BOX (STAND ALONE)
1. Follow steps 1-6 under Removal of Basket Lift Back if appliance is equipped with this option.
2. Note and disconnect all wiring and wire harnesses. (Fig. 73)
Fig. 73
3. Follow steps 1-2 under Removal of Lift Rod Mechanism if basket lift option is included on the appliance.
4. With a
5
⁄16" socket, remove (2) screws holding the motor mount support plate to the cooker. (See Fig. 67)
5. With a
5
⁄16" socket, remove (4) screws securing the rear body support bracket to the cooker. (See Fig. 73)
6. With a
7
⁄16" socket, and/or open end wrench remove (2) bolts and hardware securing the power supply box
to cooker. (Fig. 74)
Fig. 74
REAR BODY SUPPORT
SCREWS (2) EACH SIDE