Filter
Top Products
F35425 (February 2006) Page 12 of 40
4. Disconnect the water lines for the solenoid valve
being serviced and remove the solenoid valve
from the unit.
5. Reverse procedure to install solenoid valve.
PILOT/SPARK PROBE
FLAME SENSOR
1. Remove main burner assembly as outlined under
MAIN BURNER in REMOVAL AND REPLACEMENT
OF PARTS.
2. Remove the pilot assembly by disconnecting
gas tube to the pilot burner and remove screws
holding pilot assembly.
3. Replace the malfunctioning flame sensor or pilot
assembly.
4. Reverse procedure to install a new flame sensor
or pilot assembly.
5. Check for proper operation.
C24GA SERIES CONVECTION STEAMERS - REMOVAL AND REPLACEMENT OF PARTS