Filter
Top Products
F35425 (February 2006) Page 8 of 40
Door Latch Assembly
1. Open the door.
2. Remove screws from the top and bottom of the
door.
3. Pull the outer door panel out from the door
housing.
4. Remove the pins and retaining rings.
5. Remove the latch assembly from the door.
6. Reverse procedure to install. Use Loctite 271 to
secure fasteners.
COMPARTMENT CONTROLS
WARNING: DISCONNECT THE
ELECTRICAL POWER TO THE
MACHINE AND FOLLOW LOCKOUT /
TAGOUT PROCEDURES.
1. Remove compartment right side cover as
outlined under COVERS AND PANELS.
2. Remove the component being replaced.
3. Reverse the procedure to install the replacement
component, then check steamer for proper
operation.
C24GA SERIES CONVECTION STEAMERS - REMOVAL AND REPLACEMENT OF PARTS