Filter
Top Products
HALF-SIZE CONVECTION OVENS - REMOVAL AND REPLACEMENT OF PARTS
7
OVEN DOOR
Removal
WARNING:
UNPLUG UNIT BEFORE SERVICING.
1. Remove the top front cover as outlined under
"COVERS AND PANELS".
2. Remove the door switch lever from the door
shaft.
3. Remove the door switch bracket.
4. While supporting the door, remove the bearing,
door plate and spacer.
5. Lift the door from the lower bearing.
6. Reverse procedure to install door assembly and
check for proper adjustment as outlined under
"DOOR ADJUSTMENT" and "DOOR SWITCH
ADJUSTMENT" in "SERVICE PROCEDURES
AND ADJUSTMENTS".
Disassembly
1. Open the door.
2. Remove the door handle and latch plate.
3. Remove the screws which secure the inner and
outer door panels to the door frame.
4. Remove the inner and outer door panel.
5. Remove the four screws and lift the window
assembly out.
NOTE:
Use high temperature silicone between
the window and the door panel.
6. Reverse the procedure to install the new window
and adjust the door as outlined under “DOOR
ADJUSTMENT”.