Filter
Top Products
ELECTRIC COMBI OVEN - REMOVAL AND REPLACEMENT OF PARTS
Page 23 of 68
OVEN CAVITY DRAIN
WARNING:
DISCONNECT THE ELECTRICAL
POWER TO THE MACHINE AT THE MAIN
CIRCUIT BOX. PLACE A TAG ON THE CIRCUIT
BOX INDICATING THE CIRCUIT IS BEING
SERVICED.
1. Open the oven cavity door.
2. Lift up the oven cavity drain grate to remove.
3. Unscrew t-bar nut to release drain at the front.
4. Remove rear panel as outlined under
“COVERS AND PANELS”.
5. Disconnect the drain pump discharge hose
from the drain vent pipe.
6. Remove the drain vent pipe from the drain.
7. Disconnect the drain cool down water hose
from the drain nipple extension.
8. Unscrew the drain line piping from the bottom
of the oven then remove the oven drain.
9. Reverse procedure to install.