Filter
Top Products
- 3 -
INSTALLATION, OPERAT ION AND CARE OF
CHEESEMELTERS
GENERAL
Cheesemelters are produced with quality workmanship and material. Proper installation,
usage and maintenance of your Cheesemelter will result in years of satisfactory
performance.
Model
# of Burners
BTU/hr Input Rating
VICM24-L / WICM24-L
1
18,000
VICM36-L / WICM36-L
1
24,000
VICM48-L / WICM48-L
2
36,000 (2 @ 18,000)
VICM60-L / WICM60-L
2
42,000 (1 @ 18,000 + 1 @ 24,000)
VICM72-L / WICM72-L
2
48,000 (2 @ 24,000)
VICM24 / WICM24
1
20,000
VICM36 / WICM36
1
30,000
VICM48 / WICM48
2
40,000 (2 @ 20,000)
VICM60 / WICM60
2
50,000 (1 @ 20,000 + 1 @ 30,000)
VICM72 / WICM72
2
60,000 (2 @ 30,000)
INSTALLATION
Before installing, verify that the type of gas (natural or propane) and the clearance
dimensions (see page 4) agree with the specifications on the rating plate. If the supply
and equipment requirements do not agree, do not proceed with the installation. Contact
your dealer immediately. It is recommended that a trained gas service technician with the
necessary tools, instruments and skills perform the installation of the cheesemelter .
UNPACKING
This cheesemelter was inspected before leaving the factory. The carrier assumes full responsibility for
the safe delivery upon acceptance of the shipment. Check for possible shipping damage immediately
after receipt.
If the cheesemelter is found to be damaged, complete the following steps:
1. Carrier must be notified within 5 business days of receipt.
2. Carrier’s local terminal must be notified immediately upon discovery (note time, date, and
who was spoken to), and follow up and confirm with written or electronic communication.
3. All original packing materials must be kept for inspection purposes.
4. The cheesemelter cannot have been moved, installed, or modified.
5. Notify Vulcan Customer Service immediately at 800-814-2028.
Before using, remove all packaging material and protective plastic from the surfaces of
the unit. Carefully unpack your cheesemelter and make sure that no parts are discarded
with the packaging material. A pressure regulator designed to operate with the
cheesemelter has been supplied and must be installed before the cheesemelter is placed
into service. (Refer to GAS PRESSURE REGULATOR INSTALLATION in this manual).