Waterford Appliances Stainless Stell Cooker Cooktop User Manual


 
End Time” button and set the desired cooking end
time using the “-” and “+” buttons. The cook pot
ctor to the desired oven function and the oven ther-
mostat to the desired temperature. The symbol will
appear when the programme starts and an audible
signal will sound when the programme ends.
Press the “minute minder” button to cancel the
audible signal.
Semi-Automatic Operation
This mode should be used when the oven is in
operation or if it is desired to programme its use
from the time of setting the programme. Set the
function selector to the desired oven function and
the oven thermostat to the desired temperature.
Press and hold the “Cooking Duration” time using
the “-” and “+” buttons. The “A” and the
symbols will appear on the display. An audible
(Applicable to 90, 100, & 120cm Models)
The secondary electric oven is controlled using the
secondary oven control knob (Refer to section on
Control Panel Layout). This oven has five different
functions which are operated as follows:
17
Automatic Use:
Prior to using the automatic function with the main
oven, the time must be set on the digital program-
mer. Press and hold the “Cooking Duration” button
and the “Cooking End Time” button simultaneous-
ly, and adjust the time using “-” and “+” buttons.
The main oven can then be operated in the two dif-
ferent automatic modes:
Fully Automatic Operation
Press & hold the “Cooking Duration” button and set
the desired cooking duration time using the “-” and
“+” buttons. The “A” and the
ear on the display. Press and hold the “Cooking
signal will sound when the programme ends and
pressing the “Minute Minder” button will cancel this
sound. In order to cancel a programme, set the
programmer for manual operation by pressing the
“Cooking Duration” and “Cooking End Time” but-
tons. In the event of a programme being set up
incorrectly (i.e. the time of day is in between the
calculated cooking start and end times), the audi-
ble signal will sound and the symbol “A” will flash.
Minute Minder:
The digital programmer also has a timer feature
incorporated in it. Press and hold the “Minute
Minder” button and set the desired time period
using the “-” and “+” buttons. When the time has
sounds. Press the “Minute Minder” button to can-
cel.
Fig. 15
Fig. 16
Minute Minder
Cooking Duration
Cooking End Time
Decrease Set Time
Increase Set Time
Function Button
symbols will app-
symbol
is switched off. Set the function sele-
elapsed “ ” is displayed and an audible signal
Function 1: Static Oven (Temperature Settings)
This operates the top and bottom elements in the
oven with the heat output controlled by the oven
MAIN OVEN PROGRAMMER
USING THE SECONDARY ELECTRIC OVEN