Filter
Top Products
4-7
Spacer Bracket (Left Side) 18˝ Models
REMOVING THE WATER RECIRCULATION PUMP
1. Unplug ice maker or disconnect power.
2. Open the ice maker door.
3. Remove the ice from the storage bin.
4. Unscrew the drain cap from the reser-
voir, drain the water, and replace the cap
tightly.
5. Place a cloth in the drain hole to avoid
hardware from falling inside.
6. Remove the hex-head screw from the water
recirculation pump shield and remove the
shield (see the lower left photo).
7. Disconnect the water fi ll tube from the
pump mounting bracket.
8. Disconnect the two wire recirculation and
drain pump connectors from the harness
block.
9. Remove the two thumbscrews from the
reservoir and remove the reservoir from
the ice maker.
10. Remove the recirculation pump outlet
tube.
11. Remove three hex-headed screws from
the pump mounting bracket and remove
pump assembly.
12. Separate the recirculation pump from the
bracket.
Thumbscrew
Screw
Thumbscrew
Water Reservoir
Recirculation
Pump Shield
Drain Cap
Drain Pump
2-Wire Connector
Water Fill Tube
Recirculation Pump
Outlet Tube
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
WARNING
WARNING