Filter
Top Products
When the cooking time ends, “End” will
show on the Display and 4 beeps will
sound. (You can stop the beeping by
opening the door or by touching
CANCEL.) “End” will remain on the
Display and a reminder tone will
sound every 60 seconds [to remind
you that food is left in the oven) until
the door is opened or CANCEL is
touched. The Display will then show
the time of day.
Changing the Cook Power
The Cook Power can be changed any time before touching START or during the cycle
. Touch COOK POWER.
l
Touch a number for the new Cook Power.
l
Touch START. The cycle will cook at the new Cook Power for the original time.
OR...
l
Touch COOK POWER twice if you want to change a lower Cook Power to HIGH.
. Touch START
Using AUTO SET
Auto Set TIME and TEMP are preset cooking cycles which store commonly used cooking
times and probe temperature settings.
Auto Set TIME
Auto Set TIME provides ten preset times. One to nine minutes at HIGH Cook Power can be
selected by touching TIME and the corresponding Number Pad (I-9). You do not need to
touch any additional Number Pads as you do when using COCK1 or COCK 2. This
provides a short-cut method for setting commonly used cooking times.
The Auto Set Chart included with your microwave oven and the Auto Set Guide on the
inner door panel help you use TIME to cook various food items without having to look up
the cooking times.
A preset time of 2 minutes, 30 seconds at HIGH Cook Power is available by touching just
the TIME Pad. The time may be changed to any time from O-99 minutes, O-99 seconds,
allowing you to store your favorite cooking time and Cook Power, or to pre-program the
oven for someone else to cook an already prepared dish at a later time. See page13 for
instructions.
DO THIS...
THIS HAPPENS...
1.
Put food In the oven and
close the door.
2.
Touch TIME.
(Optlon: Sklp to Step 6 if
you want to use the pre-
set cooking tlme and
Cook Power.]
The AUTO SET Indicator Light will
come on and the Display will
show 2 minutes, 30 seconds (or
the time you have set as your
favorite cycle).
continued on next page