Filter
Top Products
The Display will show the numbers
II
you touched in the order you
touched them. The example shows
1 minute. 30 seconds.
I
4.
Touch START.
d
COUd
QWfl
The oven will automatically cook at
HIGH Cook Power.
The COOK 1 indicator Light will
stay on to show that the oven is cook-
ing in the first cycle.
I
The Display counts down the time to
show how much time is left in the first
cycle.
When the cooking time ends, “End” will
show on the Display and 4 beeps will
sound. [You can stop the beeping by
opening the door or by touching
CANCEL.) “End” will remain on the
Display and a reminder tone will
sound every 60 seconds (to remind
you that food is left in the oven] until
the door is opened or CANCEL is
touched. The Display will then show
the time of day.
Changing the Cooking Time
Cooking time can be changed any time before touching START or during the cycle:
1. Touch COOK 1.
2. Touch numbers for the new time,
3. Touch START.
Cook 1 will continue cooking for the new time.
Cooking at Lower Cook Powers
For best results, some recipes call for lower Cook Powers. The lower the Cook Power, the
slower the cooking. Each Number Pad also stands for a different percentage of Cook Power.
Many recipes in your MICRO MENUS 5 Cookbook tell you, by number, which Cook Power to use.
Recipes in other books and magazines may tell you by name (HI, MED, LO, etc.] or
percentage [IO%, 50%, 80%. etc.].
The following chart gives the percentage of Cook Power each Number Pad stands for, and
Cook Power name usually used.
automatic 100% of full power HIGH
9 =
90% of full power
8 = 80% of full power
7 = 70% of full power MED-HIGH
6 = 60% of full power
5 = 50% of full power MED
4 = 40% of full power
3 = 30% of full power MED-LOW
2 = 20% of full power
1 = 10% of full power LOW
0 = no power (fan and light will be off]
continued on next page
9