Filter
Top Products
Changing the Pre-programmed Setting
You can change the pre-programmed cooking time and Cook Power in Auto Set TIME to the time and
power you most often use. To change the Auto Set TIME setting, follow these steps:
1. Touch Auto Set TIME twice.
2. Touch the Number Pads forthe new desired cooking time. If HIGH Cook Power is desired, skip to Step
5.
3.
Touch COOK POWER.
4. Touch the Number Pad for the desired Cook Power.
5. Touch START. The oven will start. If food is not to be cooked at this time, touch CANCEL. The
new time
and Cook Power will be stored in memory for future use. NOTE: If electric power ever goes off, the
oven will go back fo fhe pre-programmed 2 minutes, 30 seconds at HIGH Cook Power setting.
Auto Set TEMP
Auto Set TEMP provides ten preset probe temperatures (see “Cooking with the Tempera-
ture Probe” on page 19). One-hundred ten (110) to one-hundred ninety (190) degrees
at 70% Cook Power can be set by touching TEMP and the corresponding Number Pad
(l-9). You do not need to touch any additional Number Pads as you do when using
COOK 1 or COOK 2. This provides a short-cut method for setting commonly used probe
temperatures.
The Auto Set Chart included with your microwave oven and the Auto Set Guide on the
inner door panel help you use TEMP to cook various food items without having to look up
the temperatures.
A preset temperature of 165°F at HIGH Cook Power is available (after inserting the probe]
by touching just the TEMP Pad. This temperature may be changed to any temperature
from 9O’F to 200°F allowing you to store your favorite cooking temperature and Cook
Power, or to pre-program the oven for someone else to cook an already prepared dish at
a later time. See page 14 for instructions.
DO THIS...
THIS HAPPENS...
1. Put food in the oven and
close the door.
The AUTO SET and PROBE TEMP Indica-
tor Lights will come on and the Display
will show 165°F (or the temperature you
have set as your favorite cycle).
3. Touch a Number Pad for
the new temperature yet
want fra Irn 110°F to 190°F.
u
The Display will show what you
touched in degrees Fahrenheit.
This example shows 140°F.
To select a Cook Power other than
70%. touch COOK POWER.
The COOK POWER Indicator Light will
come on and the Display will show
“P-70:’ This shows the oven is pre-
programmed to cook at 70% power.
continued on next page ,?