Filter
Top Products
Additional Information
l
Temperature may be changed after START is touched by touching TEMF! the new number
and START.
l
Auto Set TEMP can be programmed to follow the Cook cycle, if desired.
l
“PROB” will show on the Display after START is touched if the probe is not plugged into the
oven. This will only appear when Auto Set TEMP has been selected alone, or between the
last Cook cycle and Auto Set TEMP selection.
l
“ERR” will show on the Display after START is touched, if an incorrect temperature has
been selected (under 90°F or over 200°F).
l
See “Hints for Using the Temperature Probe” on page 21.
Defrosting
Use QUICK DEFROST to thaw frozen food before cooking. For suggested defrost times, see
the guide behind the oven door or in your MICRO MENUS”’ Cookbook. Do not use defrosting
times developed for other types of defrost systems, as food may be partially cooked.
DO THIS... THIS HAPPENS...
1. Put frozen food in the oven
and close the door.
The QUICK DEFROST Indicator Light
will come on and the Display will
show four 0’s.
2.
Touch QUICK DEFROST.
The Display will show the number
you touched in the order you
touched them. This example shows
2 minutes, 30 seconds.
4.
Touch START.
The QUICK DEFROST Indicator Light
will stay on to show that the oven is in
the Quick Defrost Cycle.
The Display counts down the time to
show how much defrosting time is left.
When the defrost time ends, “End” will
show on the Display and 4 beeps will
sound. (You can stop the beeping by
opening the door or by touching CAN-
CEL.) “End” will remain on the Display
and a reminder tone will sound every
60 seconds (to remind you that food
is lefi in the oven) until the door is
opened or CANCEL is touched. The Dis-
play will then show the time of day.
15