Filter
Top Products
The Display will show what you
touched. This example shows 60%
of full power.
7. Touch Number Pads for the
Cook Power you want.
8. Touch START.
(Note: If the temperatures
over 200°F (93°C) or
under 90°F (32°C) are
programmed, you will hear
a beep and the Display
will show an “E” Touch
number pads for another
final temperature.)
(Note: If the probe plug
has not been inserted in
the oven socket, you will
hear a beep, the Display
will blink and the PROBE
Indicator Light will come
on. The oven will not
start until the probe
plug is inserted.)
The COOK1 Indicator Light will
stay on and the Display will show a
“-9OF.” This shows you the oven is
cooking with the Temperature Probe
and the food is cold. The Cook
Power Indicator Light will go off.
The oven will cook in the Cook Power
you selected.
After the food has reached 90°F
(32”(Z), the Display will show the
temperature increase for every 5:
To check set temperature, touch
PROBE TEMP The Display will show
the temperature you set. Touch
START to return the Display to the
actual food temperature.
The Cook Power can be checked by
touching the COOK POWER Pad. The
Cook Power Indicator Light will
come on and the Display will show
the Cook Power you selected.
Touch START to return the Display
to the actual food temperature.
When the probe senses the temper-
ature you selected, you will hear
3 beeps. When the beeping stops,
the oven will automatically go
into the Keep Warm cycle.
When in Keep Warm, the Display
will show the time counting down
from 60 minutes.
When Keep Warm cycle is over, you
will hear 3 beeps. When the beep-
ing stops, the Display will show
the time of day. The food can be
removed any time during the Keep
Warm cycle. After removing the
food, touch CHANGE/CANCEL Pad
twice to cancel Keep Warm.
13