Filter
Top Products
7. Touch In the cooklng ftme
and Cook Power.
m
8. Touch START.
The Indicator Lights and Display will
show the same information as “De-
frosting and cooking in two cycles”
during operation. During the Cook 1
Cycle the oven will be off, but the
Display will count down the set time
Note: If you hear the blower start when you touch START; you have not set the oven
properly. Touch CHANGE/CANCEL Pad twice and stari over.
Extra Information:
l
You can’t touch in more than 99 minutes, 99 seconds of delay in the COOK1 Cycle
l
If you open the door before the oven begins to cook, be sure to retouch START.
CAUTION:
Use foods that will not go bad or spoil while waiting for cooking to start. Avoid using
dishes with milk or eggs, cream soups, cooked meats, poultry or fish, or any item
with baking powder or yeast.
Smoked or frozen meats may be used; so can vegetables, fruits and casserole-type
foods.
Any food that has to wait for cooking to start should be very cold or frozen before
it is put in the oven. MOST UNFROZEN FOODS SHOULD NEVER STAND AT ROOM
TEMPERATURE MORE THAN TWO HOURS BEFORE COOKING STARTS.
Cancelling instructions
l
Touch CHANGE/CANCEL twice to erase all instruction.
l
Opening the oven door dunng cooking does not cancel cookrng instructtons.
Programming tone
Each time you touch a pad you WIII hear a tone If you don’t hear a
tone
It
IS
because the
instruction
IS
not correct
EXAMPLE: If you touch a Number Pad without touching the COOK1 & 2 Pad
first, you will not hear a tone. The instruction IS not correct
Other operating hints
1. To double check settings, touch the command pads for the settings you want to check
The instructions you touched in for those pads will show in the Display. Touch START to
Start
the oven or return the Display to show what the oven is doing,
2. To stop the oven while it is running:
l
Open the door. The oven will stop. You can restart it by closing the door and
touching START.
l
Touch CHANGE/CANCEL twice. All instructions will be erased You must touch in new
instructions.
l
If YOU touch two instructions into the same cycle, the second instruction will erase
the first.
IB