Filter
Top Products
51
PROBLEM
Cooking results are
not what you expected
The display is showing
“PF”
“F” followed by a
number shows on the
display
CAUSE
• The range is not level. (See Installation Instructions.)
• The oven temperature seems too low or too high. See
the “Adjusting the oven temperature control” section on
page 20 to adjust the oven temperature.
• You did not preheat the oven before baking (if called for
in recipe).
• You are using a pan that is not the correct type or size.
Refer to a reliable cookbook or recipe for recommended
pan type and size.
• There is not enough air space around pan when baking.
Allow 1
1
⁄2 to 2 inches of air space on all sides of pan.
• The cookware is too large or too small for the surface
cooking area being used. The pan should be the same
size or slightly larger than the surface cooking area
being used.
• There has been a power failure. Reset the clock. (See the
“Setting the clock” section on page 15.)
• Press the Off/Cancel pad. If the code reappears, note the
code and call for service. (See Step 2 in the “Requesting
Assistance or Service” section on page 52.)
If none of these items was causing your problem, see the “Requesting Assistance or
Service” section on page 52.
TROUBLESHOOTING