Filter
Top Products
24
USING THE SELF-CLEANING CYCLE
SETTING THE CONTROLS
1. Press the auto clean pad.
The clean indicator light will light up.
This will automatically set a 3
1
⁄2-hour Self-
Cleaning cycle.
NOTE: There will be a 30-minute cool-down
1
⁄2 hour before the cycle is over.
2. Set the cleaning time (optional).
If you want a Self-Cleaning cycle longer or
shorter than 3
1
⁄2 hours, use the hour and minute
pads to set the cleaning time you want. Press
the “up” (s) or “down” (t) pad(s) until a time
between 2
1
⁄2-4
1
⁄2 hours shows on the display.
•
Use 2
1
⁄2 hours for light soil.
•
Use 3
1
⁄2-4
1
⁄2 hours for average to heavy soil.
3. Start the oven.
NOTE: The on and heat indicator lights will
light up.
4. After Self-Cleaning cycle starts:
The door locked indicator light will light up when
the oven door locks.
NOTE: If you open the door before starting the
Self-Cleaning cycle, “door” will show on the
display. If you do not close the door within
5 minutes, the cycle will be canceled.
5. After Self-Cleaning cycle ends and the oven
reaches normal baking/roasting temperatures:
The clean, door locked, and on indicator lights
will go out.
Press the off/cancel pad to clear the display.
AUTO
CLEAN
PRESS YOU SEE
ON
PRESS YOU SEE
TIME
TEMP
ON
(example for 4 hours,
30 minutes)
START
5 SEC
ENTER
PRESS YOU SEE
ON
YOU SEE
ON
YOU SEE
PRESS
OFF
CANCEL