Filter
Top Products
Page 19
Exterior Grille Installation
The exterior grille is required on all installations where the condenser side of the unit is exposed to the outside
of the dwelling (i.e. rain and weather).
STEP 1:
Now determine at what depth the unit will be installed:
• For a non-ush installation (i.e. holes location #2 WhisperKOOL retrot or #1 Middle Wall or #3), place the
grille on the condenser end and line up the holes on the grille with the holes on unit location #4. Use
the 8 self tapping screws provided to fasten the grille to the unit.
• For a ush installation, place the grille on the condenser side and then place the mounting bracket over
the grille sides, “stacking” them. Align the holes and fasten with the 8 self-tapping screws provided.
* It is required to use self tapping screws provided. Do not drill screws into unit.
INSTALLATION OPTIONS
Non-Flush Installation Flush Installation