Filter
Top Products
Page 8 PT-EXPL5000 060311
Customer Warranty Registration
PLEASE COMPLETE AND RETURN THE WARRANTY CARD UPON RECEIPT OF THE UNIT.
By completing the Product Registration Card, you will be conrmed in our customer database ensuring that
your information is on le to help you obtain ecient warranty service.
Please refer to pages 37 - 39 for complete terms and conditions, warranty guidelines, and policy for your Whis-
perKOOL Extreme Series cooling unit.
Receiving and Inspecting the Unit
• Lift only at the designated handhold locations on the shipping container or fully support the unit from
underneath. A shipment may include one or more boxes containing accessories.
• Before opening the container, inspect the packaging for any obvious signs of damage or mishandling.
• Write any discrepancy or visual damage on the Bill of Lading before signing.
• Place the box containing the WhisperKOOL unit on a tabletop to prepare it for testing prior to installing.
• Sit upright for 24 hours.
Note: WhisperKOOL Extreme units are manufactured in the USA and tested prior to shipment.
Review the Packing Slip to Verify Contents
• Check the model number to ensure it is correct.
• Check that all factory options ordered are listed.
If any items listed on the packing slip do not match your order information, contact WhisperKOOL Customer
Service immediately.
Check the Box for the following contents:
Mounting Bracket 14 ¼” (2)
Mounting Bracket 15 ¾” (2)
Accessory Kit One:
• WhisperKOOL Extreme Series Owner’s Manual
• Registration / Warranty Card
Accessory Kit Two:
• Power Cord
• Mounting Bracket Insulation Foam 14 ¼” (2)
• Mounting Bracket Insulation Foam 15 ¾” (2)
• Bottle Temperature Probe (Standard Unit)
Accessory Kit Three:
• 1 ¾ Standard Screws (9)
• ½ Self-Tapping Screws (9)
• ½ x ½ Barbx MNPT Fitting
• Drain Line tube (1)
• Connection “T” (1)
Please leave the WhisperKOOL unit in its original box until you are ready for installation. This will allow you to
move the product safely without damaging it. When you are ready to remove the product from the box, refer to
page 15 for installation instructions.
Note: Save your box and all packaging materials. They provide the only safe means of transporting/shipping
the unit.
RECEIVING & INSPECTING THE UNIT