Wolf Appliance Company Range Range User Manual


 
BEFORE USING FOR THE FIRST TIME
Before using the oven of your gas range for the first time,
it needs to go through a “burn in” process. Set the oven
temperature at 250°F (120°C) and operate for one hour.
At the end of the hour, reset the oven to 500°F (260°C) and
heat for a second hour. Turn the oven off and allow it to
cool gradually with the door closed.
This process will burn off any residual oil and grease used
in the manufacturing process. A small amount of smoke
and odor may be noticed during the initial break-in period
Gas Range Oven Operation 21
wolfappliance.com
Oven Operation
OVEN PREHEAT
Preheating is necessary for most cooking because timing
is more likely to coincide with the recipe when the oven is
preheated.
To preheat, turn the control knob directly to the oven
temperature. Do not turn it to a higher temperature and
then back to the desired setting. Setting a higher tempera-
ture first and then lowering it will not preheat the oven any
faster.
When the oven indicator light turns off, the oven tempera-
ture has been reached. Refer to the illustration below.
Place the food to be cooked inside the oven. If the door is
left open for any length of time, heat will escape and the
temperature inside will be less than what is set.
The oven indicator light will cycle on and off as the ther-
mostat needs more heat to maintain the set temperature.
OVEN
INDICATOR
LIGHT
O
F
F
O
N
C
O
O
L
F
A
N
Oven indicator light.