Filter
Top Products
6 Freedom SW Owner’s Guide
System Components
The Freedom SW uses Xanbus, a network communications protocol
developed to communicate the Freedom SW’s settings and activity
to other Xanbus-enabled devices.
You can configure and monitor the Freedom SW and every Xanbus-
enabled device in the system using an optional Xanbus System
Control Panel (SCP).
Another component is the optional Xanbus Automatic Generator
Start (AGS) which allows operation with a wide range of
generators, supported through a dedicated generator input. Simply,
the AGS automatically starts and stops your generator.
The Freedom Sequence Intelligent Power Manager is a fully
integrated power management system that provides automatic
power and load management for use in recreational vehicles (RV)
while receiving power from a generator or shore power. This device
works in the background to prevent monitored AC loads from
exceeding shore and generator breaker capacity.
See “Xanbus-enabled Products and Accessories” on page 8 for part
numbers.
Xanbus System
The Xanbus system includes the Freedom SW and other Xanbus-
enabled devices. The Freedom SW is the device in a Xanbus system
that typically provides network power—500 mA at 12 volts DC. All
of the Xanbus-enabled devices, such as the Freedom SW, the SCP,
and the AGS are able to communicate their settings and activity to
each other. See Figure 2.
Figure 2 Typical Xanbus System Diagram
Xanbus System Control Panel
Xanbus Automatic Generator Start
System Control Panel
network terminator network terminator
Automatic Generator Start
Freedom Sequence
Freedom SW Inverter/Charger
FREEDOM SW
3012
FREEDOM
SW
3012
I
n
v
e
r
t
er
R
e
set Enable
I
nve
r
t
er
A
C
/
On
C
ha
r
g
e
F
ault
Generator
Shore
Power
AC Loads
AC Panel
BATTERY
Inverter
Load Panel
Freedom SW 3K2K InvChg Owners Guide.book Page 6 Thursday, July 31, 2014 1:42 PM