Filter
Top Products
97-0019-01-01 19
Operating the Freedom SW with the SCP
This section contains detailed information and procedures for using
your Freedom SW in conjunction with the System Control Panel
(SCP).
If you’re using the SCP to operate or monitor the status of the unit,
you may also refer to the Xanbus System Control Panel Owner’s
Guide.
The SCP provides operating, configuration, and monitoring
capability for your Xanbus system.
The SCP:
• Monitors activity throughout your onboard power system.
• Displays the latest information about your inverter/charger,
battery voltage level, battery charge output, and generator start
and stop activity.
• Displays the settings for each Xanbus-enabled device in the
system.
• Enables you to adjust the settings for each Xanbus-enabled
device in the system.
• Preserves all of its settings if system power is interrupted. After
power is restored, you don’t have to reconfigure the SCP or any
of the Xanbus-enabled devices connected to it.
This section provides information on operating the Freedom SW
with the SCP. Please refer to the System Control Panel Owner’s
Guide for complete information on using the System Control Panel.
LIMITATIONS ON USE
Do not use in connection with life support systems or other medical
equipment or devices.
Failure to follow these instructions can result in death or serious
injury.
Freedom SW 3K2K InvChg Owners Guide.book Page 19 Thursday, July 31, 2014 1:42 PM